Aluminum Rod Continuous Casting And Rolling Line
Oil-free pure aluminum rod continuous casting and rolling line is used to produce pure aluminum rods of 9.5mm, 12.5mm, 15mm. The productivity ranges from 2.5T to 5T per hour, the cross-sectional area of the casting bar ranges from 1500 to 2400mm2.
The continuous rolling machine has function of automatically feeding and rods stacking stop. To clean off the moisture on the surface of the aluminum rod, a dryer is fixed at the end of the guiding pipe to ensure a smooth delivery of the rod. The arc guiding pipe is a trolley-guiding construction to reduce the scratch upon the rod surface. The rod is coiled by means of centrifugal laying head to make the aluminum rod preformed before entering the coiling basket. Trolley-guiding device is adopted to ensure the rods are in order when the panels are exchanged and ensure the coiling of continuous twin-coiler device.
|Diameter of aluminum rod||9.5mm, 12.5mm, 15mm|
|Production capacity||2.5~5.0 T/h|
|Raw material||Aluminum ingot/electrolytic aluminum|
|Furnace||Aluminum ingot: vertical furnace+ round holding furnace|
|Electrolytic aluminum: round holding furnace|
|Weight of coiled rod||1.5-2.5T|