8 Year Exporter Argon Arc Welding Cable Armouring Machine - Concentric and Semi-tangential Taping Machine – LINT TOP
Product Details
8 Year Exporter Argon Arc Welding Cable Armouring Machine - Concentric and Semi-tangential Taping Machine – LINT TOP Detail:
1. Introduction
Concentric and semi-tangential wrapping head can be equipped with various production lines such as stranding line, cabling line, rewinding line and extrusion line for wrapping with metal strip and non-metallic strip.
2. Technical Parameters
|
Type |
Φ500 Concentric Taping Machine |
Ф600 Semi-tangential Taping Machine |
|
Wire Size (mm) |
Φ30 Max. |
Φ100mm |
|
Bobbin Specification(Dia.*Core Dia.*Width) |
Φ500×Φ76×Φ(20-50)mm |
Φ600×Φ76×Φ(15-75)mm |
|
Wrapper Type |
Concentric wrapper |
Eccentric wrapper |
|
No. of bobbins |
6 |
2 |
|
Motor Power |
11KW(AC variable frequency motor) |
11KW (Siemens AC variable frequency motor) |
|
Rotating Speed |
800r/min |
n≤500r/min |
|
Pitch |
Stepless Adjustable |
Stepless Adjustable |
|
Tension Control |
Mechanical tension |
Mechanical tension, optional hysteresis tension |
|
Wrapping Material |
Copper tape or steel tape |
Polyester tape, non-woven fabric, glass cloth, semi-conductive cloth, mica tape, water-blocking tape, copper tape or steel tape |
Product detail pictures:
Related Product Guide:
We always do the job to be a tangible group making sure that we can provide you with the top top quality as well as ideal value for 8 Year Exporter Argon Arc Welding Cable Armouring Machine - Concentric and Semi-tangential Taping Machine – LINT TOP , The product will supply to all over the world, such as: Mauritius, Bulgaria, Swiss, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
FAQ
Q: Can I visit your factory?
A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.
Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.
-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.
Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.
Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.
Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.
Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.
Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.
Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.
