al wire enameling machine

Our commission is to serve our buyers and purchasers with most effective good quality and aggressive portable digital goods for al wire enameling machine, cable twist buncher , Fiber Loose Tube Extrusion Line , cable enameling machine , Welcome to visit our company and factory. Please feel free to get in touch with us if you need any further assistance. With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for al wire enameling machine, When you are keen on any of our items following you view our product list, please feel free to make contact with us for inquiries. You'll be able to send us emails and get in touch with us for consultation and we shall respond to you as soon as we are able to. If it's convenient, you could find out our address in our web site and come to our enterprise. or additional information of our items by yourself. We're generally ready to build lengthy and steady co-operation relations with any possible shoppers within the associated fields.


  • Vertical Enameling Machine

    Vertical Enameling Machine

    1. Introduction This machine is used to produce wires larger than 0.8 mm in diameter. This machine adopts the latest R & D of “energy saving and environmental protection” type oven. The energy consumption is less than 200kwh/t. 2. Features 1. High Efficiency: PLC automatic control 2. Environmental protection: PLC auto exhaust value 3. Environment Data: VOC≤20mg/m³ 3. Technical Parameters Model LT-8000V-1/19*-6 LT-8000V-1/14*2-8 LT-8000V-1/8*2-9 Wire Range (mm) Cu: Φ0.80-1....
  • Newly Arrival Aluminum Profile Aging Oven -
 Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    Newly Arrival Aluminum Profile Aging Oven - Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    Nowadays, the world has already entered the information society. LAN, the basic unit of high-speed information network, its transmission rate is getting faster with the development of society. The data cable is one of the most important transmission media of the LAN, and the development of the LAN is also driving the rapid growth of the data cable. In the future for a long time, data cables will be used widely . In order to meet the high-speed information transmission requirements of today...
  • Personlized Products Copper Wire Drawing Line -
 Vertical Enameling Machine – LINT TOP

    Personlized Products Copper Wire Drawing Line - Vertical Enameling Machine – LINT TOP

    1. Introduction This machine is used to produce wires larger than 0.8 mm in diameter. This machine adopts the latest R & D of “energy saving and environmental protection” type oven. The energy consumption is less than 200kwh/t. 2. Features 1. High Efficiency: PLC automatic control 2. Environmental protection: PLC auto exhaust value 3. Environment Data: VOC≤20mg/m³ 3. Technical Parameters Model LT-8000V-1/19*-6 LT-8000V-1/14*2-8 LT-8000V-1/8*2-9 Wire Range (mm) Cu: Φ0.80-1....
  • High reputation Cable Shrinking Machine -
 Optical Cable Secondary Coating Line – LINT TOP

    High reputation Cable Shrinking Machine - Optical Cable Secondary Coating Line – LINT TOP

    1. Introduction The secondary coating of optical fiber is to coat the outer surface of the optical fiber once, and then squeeze the loose tube with a certain diameter and a certain thickness. The primary coated fiber can move freely in the loose tube, and the loose tube is filled with water blocking ointment. The secondary coating of the optical fiber is the second layer of protection for the optical fiber after the primary coating and coloring. The optical strength of the optical fiber after...
  • Top Quality Rigid Frame Strander -
 Building Wire Extrusion Line (Suitable for 1.5-16mm²)  – LINT TOP

    Top Quality Rigid Frame Strander - Building Wire Extrusion Line (Suitable for 1.5-16mm²) – LINT TOP

    1. Introduction Building wires insulation lines are suitable for several thermoplastic compounds such as PVC, PE, XLPE and LSHF. Optional insulation line can be equipped with a co-extruder for color skinning & stripping purposes and the range is completed with THHN insulation lines by including a tandem extruder for PA(Nylon) outer jacketing. 2. Features 1. HMI(touch screen) + Siemens 300/1200 PLC, provides a friendly operating interface for the process control. 2. Compact designed extrud...
  • Super Lowest Price Optical Cable Production -
 High Speed Double Twist Buncher – LINT TOP

    Super Lowest Price Optical Cable Production - High Speed Double Twist Buncher – LINT TOP

    During the production of wires and cables, multi-strand conductors need to be twisted before the insulation extrusion.The stranding of multi-strand conductors can be carried out by stranding machine or bunching machine. When the diameter of single wire is very small and the stranding finished wires with extra-soft performance, then you can only use the twisting machine instead of traditional stranding equipment. Wires from a number of single-wire pay-off bobbins which are layered and arranged...
  • Factory wholesale Wire Bunching Machine -
 Planetary Strander – LINT TOP

    Factory wholesale Wire Bunching Machine - Planetary Strander – LINT TOP

    Planetary strander is an important equipment for wire and cable stranding. It is mainly used for copper stranded wire, aluminum stranded wire, steel stranded wire, steel core aluminum stranded wire, and cabling of insulated wire core and OPGW stranding, etc. Generally, the traditional planetary strander adopts the ground shaft transmission type, and the transmission of capstan and the stranding cage are usually driven by the same motor through the reduction box, gearbox, ground shaft, angle b...
  • Fixed Competitive Price Wire Rotating Line -
 Compounding Line / Pelletizing Line – LINT TOP

    Fixed Competitive Price Wire Rotating Line - Compounding Line / Pelletizing Line – LINT TOP

    1. Introduction The CTE PLUS two-stage compounding and pelletizing system is mainly designed for the modification and compounding of heat and shear sensitive materials. Its two-stage set-up and the modular principle of the process section allow highly efficient compounding of applications such as PVC, XLPE and HFFR cable compounds, soft PVC, medical compounds, EVA footwear compounds, etc. 2. Features 1. New gearboxes of the CTE PLUS that can bear a specific torque of 7.2 Nm/cm³ is designed to...
  • Special Design for Fiber Optic Cable Production Line -
 Braiding Machine – LINT TOP

    Special Design for Fiber Optic Cable Production Line - Braiding Machine – LINT TOP

    Braiding machine is a device used for the production of braiding wire and cable shield or armor. According to different product requirements, it can be used for braiding copper wire, tinned copper wire, silver plated copper wire, aluminum magnesium alloy wire, steel wire and other materials. It is suitable for the braiding of control cables, radio frequency cables, data cables, marine cables, mining cables and other products. Our company has many years of experience in the development and pro...
  • China wholesale Copper Drawing Machine -
 Metal Sheathing Line Argon Arc Welding, Molding and Corrugating – LINT TOP

    China wholesale Copper Drawing Machine - Metal Sheathing Line Argon Arc Welding, Molding and Corrugating – LINT TOP

    To meet the needs of economic development, the power supply system is developing towards higher and higher voltage levels. In the power supply system, ultra-high-voltage power cables play a role in power transmission. These types of cables generally require a metal sheath structure to meet the performance requirements of the cable itself and the requirements of the environment. At present, metal sheath of ultra-high voltage power cables is generally protected by inert gas (helium or argon), a...
  • 8 Year Exporter Cable Sheathing Extrusion Line -
 Sheathing Extrusion Line – LINT TOP

    8 Year Exporter Cable Sheathing Extrusion Line - Sheathing Extrusion Line – LINT TOP

    1. Introduction It is used for outer sheath extrusion of insulated core or stranded core. Various imported screw cylinder and barrel with high extrusion output to be selected for extrusion such as PVC, PE, LSZH, Teflon, Nylon and other materials. 2. Technical Parameters Model LT-90 LT-120 LT-150 LT-200 Outer Dia. (mm) Φ8-40 Φ30-80 Φ35-140 Φ70-180 The Screw Dia. (mm) Φ90 Φ120 Φ150 Φ200 Length to Diameter Ratio of Screw 25:1 Max. Extrusion (kg/h) ...
  • Bottom price Wire Recycling Machine -
 Compounding Line / Pelletizing Line – LINT TOP

    Bottom price Wire Recycling Machine - Compounding Line / Pelletizing Line – LINT TOP

    1. Introduction The CTE PLUS two-stage compounding and pelletizing system is mainly designed for the modification and compounding of heat and shear sensitive materials. Its two-stage set-up and the modular principle of the process section allow highly efficient compounding of applications such as PVC, XLPE and HFFR cable compounds, soft PVC, medical compounds, EVA footwear compounds, etc. 2. Features 1. New gearboxes of the CTE PLUS that can bear a specific torque of 7.2 Nm/cm³ is designed to...