aluminum aging furnace

Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for aluminum aging furnace, Data Cable Manufacturing Machine , Ftth Fiber Drop Cable Sheathing Line , optical fiber cable extrusion line , We are always looking forward to forming successful business relationships with new clients around the world. We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for aluminum aging furnace, we have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.


  • Trolley Type Heat and Aging Furnace / Aluminum Alloy Wires Annealing Furnace

    Trolley Type Heat and Aging Furnace / Aluminum Alloy Wires Annealing Furnace

    In order to improve the mechanical properties of aluminum alloy wires after drawing, quenching heat treatment is generally required. But the strength and hardness of aluminum alloy wires do not immediately increase after quenching, in order to improve the strength and hardness of aluminum alloy wire, aging treatment after quenching is required. The aging of aluminum alloy wire can occur at normal temperature, which is called “natural aging”. However, due to the low temperature, the natural ag...
  • Factory Cheap Hot Sz Stranding Line -
 Optical Fiber Coloring and Rewinding Line – LINT TOP

    Factory Cheap Hot Sz Stranding Line - Optical Fiber Coloring and Rewinding Line – LINT TOP

    1. Introduction With the rapid development of optical communication technology, the amount of fiber optic cables used in optical communication systems has also increased rapidly. After drawing the optical fiber, in order to facilitate the identification of multiple optical fibers in the beam tube during subsequent processing and use, the method of coloring on the surface of the optical fiber is generally used. The fiber coloring and rewinding line is a production device that colors the surfac...
  • Hot Selling for Fttx Optical Fiber Machine -
 Continuous Extrusion Production Lines for Copper Flat Wires – LINT TOP

    Hot Selling for Fttx Optical Fiber Machine - Continuous Extrusion Production Lines for Copper Flat Wires – LINT TOP

    1. Introduction For the production of copper flat wire, round wire, commutator segment and other solid copper conductor. 2. Features 1. Much low loss of raw material, which makes high utilization materials. 2. With specially designed extrusion wheel, chamber and dies, our extrusion lines have longer service life and higher output compared with others’ same mode machine, which also brings a lower power consumption and lower production cost. 3. Adopting position sensor in the swing dancer, whic...
  • High definition Data Cable Making Machine -
 Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    High definition Data Cable Making Machine - Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    Nowadays, the world has already entered the information society. LAN, the basic unit of high-speed information network, its transmission rate is getting faster with the development of society. The data cable is one of the most important transmission media of the LAN, and the development of the LAN is also driving the rapid growth of the data cable. In the future for a long time, data cables will be used widely . In order to meet the high-speed information transmission requirements of today...
  • Factory Outlets Planetary Cage Strander -
 Copper Rod Continuous Casting and Rolling Line – LINT TOP

    Factory Outlets Planetary Cage Strander - Copper Rod Continuous Casting and Rolling Line – LINT TOP

    1. Prospect Under the situation of scarce copper resources and increasing stringent environmental protection requirements, most countries recycle and reuse scrap copper to save copper resources and protect the global environment. Most countries in the world are no longer adopt traditional boat-shaped copper ingots, but instead adopt continuous casting and rolling (CCR) production processes. Scrap copper is melted into recycled copper ingots through slag removal and crushing. Copper ingots are...
  • OEM China Cable Reel Manufacturers -
 Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    OEM China Cable Reel Manufacturers - Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    Nowadays, the world has already entered the information society. LAN, the basic unit of high-speed information network, its transmission rate is getting faster with the development of society. The data cable is one of the most important transmission media of the LAN, and the development of the LAN is also driving the rapid growth of the data cable. In the future for a long time, data cables will be used widely . In order to meet the high-speed information transmission requirements of today...
  • Renewable Design for Double Twister Buncher -
 Sheathing Extrusion Line – LINT TOP

    Renewable Design for Double Twister Buncher - Sheathing Extrusion Line – LINT TOP

    1. Introduction It is used for outer sheath extrusion of insulated core or stranded core. Various imported screw cylinder and barrel with high extrusion output to be selected for extrusion such as PVC, PE, LSZH, Teflon, Nylon and other materials. 2. Technical Parameters Model LT-90 LT-120 LT-150 LT-200 Outer Dia. (mm) Φ8-40 Φ30-80 Φ35-140 Φ70-180 The Screw Dia. (mm) Φ90 Φ120 Φ150 Φ200 Length to Diameter Ratio of Screw 25:1 Max. Extrusion (Phi 200)...
  • PriceList for Sz Stranding -
 Upward Continuous Casting System for Oxygen-free Copper Rod – LINT TOP

    PriceList for Sz Stranding - Upward Continuous Casting System for Oxygen-free Copper Rod – LINT TOP

    1. Introduction Upward continuous casting machine is a new technology to produce oxygen free copper rod, tube, and flat billet at a great length. Its production of oxygen free copper rod and profiles are featured with high conductivity and low oxygen content. Compare with some traditional technology, this new method is lower in capital investment, easy to operate, economic in producing consuming, high quality in production, and flexible in changing production size but no pollution to environm...
  • Good Quality Optical Cable Production Line -
 Metal Sheathing Line Argon Arc Welding, Molding and Corrugating – LINT TOP

    Good Quality Optical Cable Production Line - Metal Sheathing Line Argon Arc Welding, Molding and Corrugating – LINT TOP

    To meet the needs of economic development, the power supply system is developing towards higher and higher voltage levels. In the power supply system, ultra-high-voltage power cables play a role in power transmission. These types of cables generally require a metal sheath structure to meet the performance requirements of the cable itself and the requirements of the environment. At present, metal sheath of ultra-high voltage power cables is generally protected by inert gas (helium or argon), a...
  • Professional Design Braiding Machine -
 Triple-layer Co-extrusion Dry-cure CCV Line – LINT TOP

    Professional Design Braiding Machine - Triple-layer Co-extrusion Dry-cure CCV Line – LINT TOP

    1. Introduction This Continuous Catenary Vulcanization (CCV) Line is designed for continuous producing 6-35KV, 35-132KV XLPE insulated power cable with 3-layer co-extrusion. 2. Features 1. Controlled by computer and operated by touch screen, communicates with profibus. 2. Adopting 65 conductor shield, 150 insulation, 90 insulation shield, triple-layer co-extrusion. 3. Controlled by field density, shifting phase trigger function of tubes. 4. The specially designed triple-layer co-extrusion cro...
  • 2019 China New Design Optic Cable Stranding Line -
 RBD Machine with Individual Drivers – LINT TOP

    2019 China New Design Optic Cable Stranding Line - RBD Machine with Individual Drivers – LINT TOP

    1. Introduction In wire and cable products, traditional conductors are mainly copper and aluminum wires, but aluminum alloy cables have gradually gained widespread application in recent years. As the first process in the manufacture of cable products, the drawing of the conductor plays a vital role and is closely related to the quality of the product. Due to its large hardness, the use of traditional sliding gear-driven wire drawing machines can easily cause wire surface damage and drawing dr...
  • Factory source Optical Fiber Cable Manufacturing Machinery -
 Copper Horizontal Enameling Machine – LINT TOP

    Factory source Optical Fiber Cable Manufacturing Machinery - Copper Horizontal Enameling Machine – LINT TOP

    1. Introduction This machine is used to produce enameling wires below 0.8mm, commonly in fan motor wires, motor wires and transformer wires. It can produce 32 wires at the same time. It is even suitable for new factories and new operators for its simple operation. 2. Features 1. With special design, our oven takes full advantage of heat discharged. So our oven almost doesn’t consume the electricity. 2. PLC control for the 4 main control point of the oven to ensure the stability and not be aff...