banner
Home » Application » Application List

Application List

  • Optical Fiber Coloring and Rewinding Line
    The machine is mainly used to color the surface of optical fibers and makes it easy to identify the multi-fibers in the loose tube. It is also used to rewind fibers. The line adopts control system of international advanced PLC and industrial man-machine interface.
  • Copper Horizontal Enameling Machine
    This machine is used to produce enameling wires below 0.8mm, commonly in fan motor wires, motor wires and transformer wires. It can produce 32 wires at the same time. It is even suitable for new factories and new operators for its simple operation.
  • RBD Machine with Individual Drivers
    This is a non-sliding wire drawing machine driven by individual driver, which is suitable for drawing round and shaped wires for 8mm copper rod or 9.5mm aluminum (alloy)rod (high strength, medium strength and heat-resistant aluminum alloy). It can choose bobbin take-up or wire coiler to meet the demand of sale or deep processing.
  • Optical Cable Secondary Coating Line
    The line is used to extrude loose tube optical fibers with quantity of 2-12 or 24 cores. The outer diameter is Φ1.2-Φ4.0mm. The extruding material: PBT.
  • Horizontal Pair Twisting Machine with Backtwist Pay-off
    Horizontal pair twisting machine with backtwist is mainly used in the production of data cables of Cat5, Cat6, 6A-7 kinds or above. It has the advantages of precision pitch, adjustable backtwist rate and the speed can up to 5000 t/min.
  • Vertical Enameling Machine
    This machine is used to produce wires larger than 0.8 mm in diameter. This machine adopts the latest R & D of “energy saving and environmental protection” type oven. The energy consumption is less than 200kwh/t.
  • Copper / Aluminum Alloy RBD Machine
    The equipment is a gear-driven sliding wire drawing machine for 8mm copper rod or 9.5mm aluminum (alloy) rod (low strength). It can be matched with online continuous annealer to obtain the wire for process requirements.
  • Skip Type Strander / Bow Twister
    The machine is used for stranding and cabling control cables or mining cables.
  • SZ Stranding Line
    The line is used for SZ stranding of loose tube with outer diameter of Φ1.2-Φ4.0mm and Φ4.0-Φ10.0mm.
  • Sheathing Extrusion Line
    It is used for outer sheath extrusion of insulated core or stranded core. Various imported screw cylinder and barrel with high extrusion output to be selected for extrusion such as PVC, PE, LSZH, Teflon, Nylon and other materials.
  • Copper Intermediate Wire Drawing Machine
    Copper intermediate wire drawing machine which likes NIEHOFF high speed drawing machine is developed by LINT TOP to meet market demands. It is mainly used for copper wire drawing processing and copper wire online annealing.
  • Optical Fiber Sheathing Line
    The line is used to extrude inner sheath and outer sheath of optical cable, the extruding materials: LDPE, MDPE, HDPE and so on.
  • Drum Twister
    The machine is used for cabling power cables of medium & low voltage or high voltage and Milliken conductor of high voltage or extra high voltage, as well as for armoring with steel-wire and steel-tape or screening with copper wires.
  • Fine Wire Drawing Machine
    Fine wire drawing machine which likes NIEHOFF high speed drawing machine is developed by LINT TOP to meet market demands. It is mainly used for copper fine wire drawing processing and copper wire online annealing. It has the advantages of precision traverse, stepless dual frequency control, lower slip rate, high production efficiency, etc.
  • Tight Buffer Fiber Extruding Line
    The machine is used for 0.6/0.9 tight buffer fiber sheathed by buffer material.
  • Continuous Extrusion Production Lines for Copper Flat Wires
    For the production of copper flat wire, round wire, commutator segment and other solid copper conductor.
  • Rigid Frame Strander
    The machine is especially designed for wire and cable stranding and pressing work of aluminum, copper and ACSR, without back-twist stranding.
  • Multiwire Drawing Machine
    Multiwire drawing machine adopts horizontal drawing wheel arrangement, powerful spray cooling and online continuous annealing to drawing many homogenous electrical performance copper wires at the same time. This machine has a large take up capacity can collect multiple wires at the same time, which makes the subsequent process more convenient and improves production efficiency.
  • FTTH Drop Cable Extrusion Line
    This line is designed to produce 1-4 cores optical fiber or butterfly introduced optical fiber, which structure is 4-fiber ribbon unit positioned in the center and two parallel fiber reinforced plastics(FRP) placed at the two sides. Extrusion material PVC, LSZH, etc.
  • Planetary Strander
    The machine is used for stranding copper and aluminum wires and OPGW cables, as well as steel ropes.
LINT TOP is a young and vital team. Our principle is to work high efficiently, timely, orderly and rigorously.
Copyright © 2019 LINT TOP CABLE TECHNOLOGY CO., LTD. 

CONTACT US

    +86-15162145573
   +86-516-85715085
       +86-516-85716085
    sales@linttop.com
    ashley.yin
   +86-15162145573

PRODUCTS

GET IN TOUCH