Automatic Dual Type Take-Up

Automatic Dual Type Take-Up

  • Payment Terms T/T, L/C, D/P, etc.
  • Delivery Time 30 days
  • Place of Origin China
  • Port of Loading Shanghai, China
  • Shipping By sea
  • HS Code 8479400000
  • Container Load 1*20GP
  • Warranty Period 12 months

Product Details

Main Components

Commercial Parts

Packing Photos

Installation and Commissioning

FAQ

Product Details

1. Introduction

It is mainly used for rewinding into reels during the production of various cable extrusions at high speed.

2. Structural features

(1) The whole machine has a beautiful design and is easy to operate.
2)The frame is made of high quality rectangular square tube welded and annealed, with strong rigidity, stable structure, smooth running at high speed and low noise.
(3) Unique double cylinder head structure makes the bobbin positioning accurate, easy to unloading bobbins, low manual labor intensity.
4) The fastest line speed can reach to 1000m/min.
5)Automatic switching bobbins can achieve continuous production without stopping or reducing the speed.
6)From full reel to empty reel at full speed and without wire accumulator.
7) Independent PLC and touch screen control, can be integrated into any extrusion line.

3. Technical parameters

Model

630

800

1000

1250

Applicable bobbins(mm)

Φ500~Φ630

Φ630~Φ800

Φ800~Φ1000

Φ1000~Φ1250

Applicable wire diameter(mm)

0.87.0

1.57.0

1.57.0

1.57.0


  • Previous:
  • Next:

    Main Components

    This equipment is mainly composed of pay-off device, inlet module, eye die, main parts (frame structure, rotating part, stranding bow, traction device, caterpillar device, bobbin loading&unloading, take-up device), transmission system, electrical control system, safety protection cover, etc.

    1. Pay-off Device

    It can be equipped with active or passive pay-off stands according to customer requirements.

    1.1 Multi-head Active Pay-off Frame

    Multi-head Active Pay-off Frame
    It is suitable for applications where the pay-off tension needs to be precisely controlled and the bobbin weight is large, it can automatically track the take-up speed and provide the constant tension required by the process.
    1.2 Vertical Constant Tension Active Pay-off Frame

    Vertical Constant Tension Active Pay-off FrameIt can track the take-up speed automatic and supply constant tension. Tension regulation is achieved by pressure adjustment of the compressed air. Automatic emergency braking in the event of stops and wire breaks.

    In addition, we can also provide single-sided double-headed active pay-off frame, double-side double-headed active pay-off frame, vertical passive pay-off frame, horizontal static disc pay-off frame, etc. to meet the process requirements of different product bundle pay-off.

    2. Main Part

    Main Part

    The main part mainly includes the frame, stranding body, stranding bow, transmission, traction, bobbin loading and unloading, take-up and other parts. Among them: The frame structure is made of low carbon steel welded together. The body is annealed and aged to eliminate internal stress, and then machined in one go by a precision boring machine to reduce deformation under use.

    The stranding bow is made of imported carbon fibre. The special shape can reduce wind resistance. Low noise and good stability of the equipment when running at high speed.
    Adopting reducer motor screw to lift the tray up and down the bobbin. Up and down bobbin is safe and convenient.
    The take-up is controlled by servo motor, which ensures constant and non-volatile take-up tension.

    Commercial Parts

    1.Control panel adopts Siemens brand.
    2.PLC adopts Siemens brand.
    3.Schneider brand for frequency converter.
    4.The main bearing adopts NSK brand.
    5.The motor adopts Wanan brand.

    Packing Photos

    Packing photos of buncher machine-2Packing photos of buncher machine

    Installation and Commissioning

    After the order established, we will send our customer the layout drawing, circuit diagram & PLC wiring diagram, and the operating instruction. Customer can make the site planning according to the drawing we provided.
    When the equipment is about to be completed, the two parties will communicate in detail on the commissioning plan. Customer should get all the things ready before our engineer arrives. After the engineer arrives at the scene, he will meet with the customer to communicate the commissioning plan, the required expenditure and the estimated completion time. After the installation finished, the engineer will start the equipment with no-load test and full-load test. During the bunching, the engineer will train the customer ’s workers, and at the same time, the engineer will also tell them the problems they often encounter in the process and the effective solutions. We will try our best to support the workers be familiar with the entire production line.

    Installation and commissioning photos of buncher machineInstallation and commissioning photos of buncher machine-2

    FAQ

    Q: Can I visit your factory?

    A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.

    Q: Do you supply the installation and commissioning?
    A: Yes, we do as followings:
    -As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
    -No-load testing: After machine installed completely, we make no-load testing first.
    -With-load testing: Usually we will can produce 3 different wires to make load testing.

    -Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.

    Q: What information should I offer to get a detailed quotation from you?
    A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
    For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.

    Q: Can you supply the auxiliary equipment along with the machines?
    A: Yes, definitely.
    We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.

    Q: Could you do the design for the whole plant?
    A: Yes, this is our advantage.
    With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.

    Q: How can I know the status of my order?
    A: We have our OA system on tracking the production.
    For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.

    Q: How do you work on the inspection before delivery?
    A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
    After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

    Q: What exhibitions will you attend, can we meet in the fair?
    A: Dusseldorf International Wire and Cable Fair;
    Wire South America Fair;
    International Wire and Cable Fair in Shanghai;
    International Istanbul Wire Fair, etc.
    wire Southeast Asia Fair, etc.

    Send your message to us:

    Write your message here and send it to us