cable binding machine

Our target should be to consolidate and enhance the top quality and service of current goods, in the meantime frequently create new products to satisfy diverse customers' calls for for cable binding machine, Scrap Copper Wire Recycling Machine , Semi-conductive Water Blocking Tape , SF6 filled standard capacitor , Good quality is the key factor for the company to stand out from other competitors. Seeing is Believing, want more information? Just trial on its products! The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for cable binding machine, Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.


  • Automatic Coiling / Binding / Shrinking Machine

    Automatic Coiling / Binding / Shrinking Machine

    During the production of wires and cables, the packaging method in the later stage generally using a coiling, binding and film packaging. In the past, it was mainly used by a simple rewinding machine, and then wrapped films by manual. But this packaging method is mainly manual, not only has low production efficiency, high labor cost, but also it has unstable quality. The automatic coiling with binding and thermal shrinking machine provided by our company can automatically complete fully-autom...
  • Automatic Coiling and Binding Machine

    Automatic Coiling and Binding Machine

    During the production of wires and cables, the packaging method in the later stage generally using a coiling and binding type. In the past, it was mainly run by a simple rewinding machine, and then wrapped by manual. But this packaging method is mainly manual, with low production efficiency, high labor cost and unstable quality. The machine provided by our company is mainly use din the coiling and binding process of wires and cables, which ensures the cables not be loose and convenient coil l...
  • Personlized Products Copper Wire Drawing Line -
 Upward Continuous Casting System for Oxygen-free Copper Rod – LINT TOP

    Personlized Products Copper Wire Drawing Line - Upward Continuous Casting System for Oxygen-free Copper Rod – LINT TOP

    1. Introduction Upward continuous casting machine is a new technology to produce oxygen free copper rod, tube, and flat billet at a great length. Its production of oxygen free copper rod and profiles are featured with high conductivity and low oxygen content. Compare with some traditional technology, this new method is lower in capital investment, easy to operate, economic in producing consuming, high quality in production, and flexible in changing production size but no pollution to environm...
  • Chinese Professional Optic Cable Extrusion Line -
 Copper Horizontal Enameling Machine – LINT TOP

    Chinese Professional Optic Cable Extrusion Line - Copper Horizontal Enameling Machine – LINT TOP

    1. Introduction This machine is used to produce enameling wires below 0.8mm, commonly in fan motor wires, motor wires and transformer wires. It can produce 32 wires at the same time. It is even suitable for new factories and new operators for its simple operation. 2. Features 1. With special design, our oven takes full advantage of heat discharged. So our oven almost doesn’t consume the electricity. 2. PLC control for the 4 main control point of the oven to ensure the stability and not be aff...
  • Factory Supply Cable Packaging Machine -
 Drum Twister – LINT TOP

    Factory Supply Cable Packaging Machine - Drum Twister – LINT TOP

    Drum twister is an important device for stranding wires and cables which is mainly used for stranding large-length and large-section power cables and milliken conductors. It can also be armored with steel wire or steel tape, or shielded with copper wire or copper tape. This is currently a relatively advanced twisting equipment with high production efficiency, the speed is generally above 30m / min. The pay-off bobbins can be rotated synchronously with the take-up frame, or can be fixed withou...
  • Top Quality Wire Take Up Machine -
 Optical Fiber Coloring and Rewinding Line – LINT TOP

    Top Quality Wire Take Up Machine - Optical Fiber Coloring and Rewinding Line – LINT TOP

    1. Introduction With the rapid development of optical communication technology, the amount of fiber optic cables used in optical communication systems has also increased rapidly. After drawing the optical fiber, in order to facilitate the identification of multiple optical fibers in the beam tube during subsequent processing and use, the method of coloring on the surface of the optical fiber is generally used. The fiber coloring and rewinding line is a production device that colors the surfac...
  • Factory Cheap Wire Drawing Process -
 Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    Factory Cheap Wire Drawing Process - Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    1. Introduction Simplex and duplex indoor optical cables are suitable for the interconnection between instruments and communication equipment. It uses tight sleeve optical fiber, high-strength aramid reinforcement, with flame-retardant outer sheath structure. The structure of the optical cable is simple, with a small outer diameter and light weight; the all-dielectric structure is free from electromagnetic interference. It is easy to strip and use, so it has a very wide range of applications ...
  • Special Price for Fiber Optic Cable Secondary Coating -
 Optical Fiber Sheathing Line – LINT TOP

    Special Price for Fiber Optic Cable Secondary Coating - Optical Fiber Sheathing Line – LINT TOP

    1. Introduction The line is used to extrude inner sheath and outer sheath of optical cable, the extruding materials: LDPE, MDPE, HDPE and so on. 2. Technical Parameters Extruding Outer Dia. (mm) Φ7-Φ40 Structure Speed (m/min) 100 Production Speed (m/min) 10-80 Line Length (m) About 60 Extruder Φ65, Φ90, Φ120
  • Manufacturing Companies for High Speed Insulation Extrusion Linein -
 Optical Fiber Sheathing Line – LINT TOP

    Manufacturing Companies for High Speed Insulation Extrusion Linein - Optical Fiber Sheathing Line – LINT TOP

    1. Introduction The line is used to extrude inner sheath and outer sheath of optical cable, the extruding materials: LDPE, MDPE, HDPE and so on. 2. Technical Parameters Extruding Outer Dia. (mm) Φ7-Φ40 Structure Speed (m/min) 100 Production Speed (m/min) 10-80 Line Length (m) About 60 Extruder Φ65, Φ90, Φ120
  • Cheapest Factory Wire Drawing Machine Manufacturer -
 Pair Twisting Machine with Backtwist – LINT TOP

    Cheapest Factory Wire Drawing Machine Manufacturer - Pair Twisting Machine with Backtwist – LINT TOP

    With the development of communication networks, data cable,as one of its most important transmission media,its amount has rapidly increased with the development of networks. The increase in the network transmission rate also puts higher and higher requirements on the performance of the data cable used. To ensure the high performance of the data cable, more sophisticated production equipment is required to realize the processing technology. The twisting of the insulated core of the data cabl...
  • New Delivery for Aluminum Alloy Rbd Machine -
 Braiding Machine – LINT TOP

    New Delivery for Aluminum Alloy Rbd Machine - Braiding Machine – LINT TOP

    Braiding machine is a device used for the production of braiding wire and cable shield or armor. According to different product requirements, it can be used for braiding copper wire, tinned copper wire, silver plated copper wire, aluminum magnesium alloy wire, steel wire and other materials. It is suitable for the braiding of control cables, radio frequency cables, data cables, marine cables, mining cables and other products. Our company has many years of experience in the development and pro...
  • PriceList for Cradle Type Strander -
 Cradle Type Cabling Machine/ Laying Up Machine – LINT TOP

    PriceList for Cradle Type Strander - Cradle Type Cabling Machine/ Laying Up Machine – LINT TOP

    Cradle type cabling machine is an important equipment for wire and cable cable forming. It is mainly used for cabling 3 to 6-core insulated wires, which can be used in round cables with back-twisting, and stranding fan-shaped cables without back-twisting. It is also can be used for cabling LV&MV power cables, control cables, mining cables, and other large-section cables. It is can be used for non-metal and metal tape wrapping, steel tape armoring and filling with this machine. Our company...