cable twist buncher

High-quality comes 1st; support is foremost; business is cooperation" is our small business philosophy which is regularly observed and pursued by our organization for cable twist buncher, Intermediate Wire Drawing Machine , Skip Type Stranding Machine , reel , Our intention is to assist clients understand their ambitions. We are earning wonderful attempts to realize this win-win predicament and sincerely welcome you to be a part of us. "Sincerity, Innovation, Rigorousness, and Efficiency" would be the persistent conception of our enterprise with the long-term to build with each other with consumers for mutual reciprocity and mutual advantage for cable twist buncher, We have been in operation for more than 10 years. We are dedicated to quality products and consumer support. We currently own 27 product utility and design patents. We invite you to visit our company for a personalized tour and advanced business guidance.


  • High Speed Double Twist Buncher

    High Speed Double Twist Buncher

    During the production of wires and cables, multi-strand conductors need to be twisted before the insulation extrusion.The stranding of multi-strand conductors can be carried out by stranding machine or bunching machine. When the diameter of single wire is very small and the stranding finished wires with extra-soft performance, then you can only use the twisting machine instead of traditional stranding equipment. Wires from a number of single-wire pay-off bobbins which are layered and arranged...
  • Factory wholesale Wire Bunching Machine -
 Vertical Enameling Machine – LINT TOP

    Factory wholesale Wire Bunching Machine - Vertical Enameling Machine – LINT TOP

    1. Introduction This machine is used to produce wires larger than 0.8 mm in diameter. This machine adopts the latest R & D of “energy saving and environmental protection” type oven. The energy consumption is less than 200kwh/t. 2. Features 1. High Efficiency: PLC automatic control 2. Environmental protection: PLC auto exhaust value 3. Environment Data: VOC≤20mg/m³ 3. Technical Parameters Model LT-8000V-1/19*-6 LT-8000V-1/14*2-8 LT-8000V-1/8*2-9 Wire Range (mm) Cu: Φ0.80-1....
  • Manufactur standard Building Wire Jacketing Extrusion Line -
 Sheathing Extrusion Line – LINT TOP

    Manufactur standard Building Wire Jacketing Extrusion Line - Sheathing Extrusion Line – LINT TOP

    1. Introduction It is used for outer sheath extrusion of insulated core or stranded core. Various imported screw cylinder and barrel with high extrusion output to be selected for extrusion such as PVC, PE, LSZH, Teflon, Nylon and other materials. 2. Technical Parameters Model LT-90 LT-120 LT-150 LT-200 Outer Dia. (mm) Φ8-40 Φ30-80 Φ35-140 Φ70-180 The Screw Dia. (mm) Φ90 Φ120 Φ150 Φ200 Length to Diameter Ratio of Screw 25:1 Max. Extrusion (kg/h) ...
  • Factory Promotional Double Twist Strander -
 Planetary Strander – LINT TOP

    Factory Promotional Double Twist Strander - Planetary Strander – LINT TOP

    Planetary strander is an important equipment for wire and cable stranding. It is mainly used for copper stranded wire, aluminum stranded wire, steel stranded wire, steel core aluminum stranded wire, and cabling of insulated wire core and OPGW stranding, etc. Generally, the traditional planetary strander adopts the ground shaft transmission type, and the transmission of capstan and the stranding cage are usually driven by the same motor through the reduction box, gearbox, ground shaft, angle b...
  • OEM manufacturer Steel Cable Reels -
 Triple-layer Co-extrusion Dry-cure CCV Line – LINT TOP

    OEM manufacturer Steel Cable Reels - Triple-layer Co-extrusion Dry-cure CCV Line – LINT TOP

    1. Introduction This Continuous Catenary Vulcanization (CCV) Line is designed for continuous producing 6-35KV, 35-132KV XLPE insulated power cable with 3-layer co-extrusion. 2. Features 1. Controlled by computer and operated by touch screen, communicates with profibus. 2. Adopting 65 conductor shield, 150 insulation, 90 insulation shield, triple-layer co-extrusion. 3. Controlled by field density, shifting phase trigger function of tubes. 4. The specially designed triple-layer co-extrusion cro...
  • Special Design for Fiber Optic Cable Production Line -
 Optical Cable Secondary Coating Line – LINT TOP

    Special Design for Fiber Optic Cable Production Line - Optical Cable Secondary Coating Line – LINT TOP

    1. Introduction The secondary coating of optical fiber is to coat the outer surface of the optical fiber once, and then squeeze the loose tube with a certain diameter and a certain thickness. The primary coated fiber can move freely in the loose tube, and the loose tube is filled with water blocking ointment. The secondary coating of the optical fiber is the second layer of protection for the optical fiber after the primary coating and coloring. The optical strength of the optical fiber after...
  • Cheapest Price Skip Laying Up Machine -
 SZ Stranding Line – LINT TOP

    Cheapest Price Skip Laying Up Machine - SZ Stranding Line – LINT TOP

    1. Introduction With the rapid development of optical communications, the amount of optical fiber loose tube cable for outdoor has increased rapidly. However, the capacity of the optical fiber in the loose tube is limited and it is impossible to make the loose tube large. In addition, in order to facilitate the connection identification of optical fibers and the distribution of optical nodes, the number of optical fibers in every loose tube should not be too large. For large-capacity communic...
  • Factory Supply Cable Wrapping Machine -
 Multiwire Drawing Machine – LINT TOP

    Factory Supply Cable Wrapping Machine - Multiwire Drawing Machine – LINT TOP

    1. Introduction Generally speaking, the production of conductors is the first step during the manufacture of wires and cables. The quality of the conductors directly relates to the performance of the entire cable product. And the production efficiency also relates to the production cost of the cable product. The traditional conductor processing is carried out by a single-wire tower-wheel drawing machine. The thick copper / aluminum wire is drawn and annealed by the drawing machine to achieve ...
  • Factory best selling 8 Wires Multi Wire Drawing Machine -
 Trolley Type Heat and Aging Furnace / Aluminum Alloy Wires Annealing Furnace – LINT TOP

    Factory best selling 8 Wires Multi Wire Drawing Machine - Trolley Type Heat and Aging Furnace / Aluminum Alloy Wires Annealing Furnace – LINT TOP

    In order to improve the mechanical properties of aluminum alloy wires after drawing, quenching heat treatment is generally required. But the strength and hardness of aluminum alloy wires do not immediately increase after quenching, in order to improve the strength and hardness of aluminum alloy wire, aging treatment after quenching is required. The aging of aluminum alloy wire can occur at normal temperature, which is called “natural aging”. However, due to the low temperature, the natural ag...
  • Excellent quality Lan Cable Making Line -
 Automatic Coiling and Binding Machine – LINT TOP

    Excellent quality Lan Cable Making Line - Automatic Coiling and Binding Machine – LINT TOP

    During the production of wires and cables, the packaging method in the later stage generally using a coiling and binding type. In the past, it was mainly run by a simple rewinding machine, and then wrapped by manual. But this packaging method is mainly manual, with low production efficiency, high labor cost and unstable quality. The machine provided by our company is mainly use din the coiling and binding process of wires and cables, which ensures the cables not be loose and convenient coil l...
  • PriceList for Cradle Type Strander -
 Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    PriceList for Cradle Type Strander - Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    1. Introduction Simplex and duplex indoor optical cables are suitable for the interconnection between instruments and communication equipment. It uses tight sleeve optical fiber, high-strength aramid reinforcement, with flame-retardant outer sheath structure. The structure of the optical cable is simple, with a small outer diameter and light weight; the all-dielectric structure is free from electromagnetic interference. It is easy to strip and use, so it has a very wide range of applications ...
  • PriceList for Lan Cable Production Line -
 Metal Sheathing Line Argon Arc Welding, Molding and Corrugating – LINT TOP

    PriceList for Lan Cable Production Line - Metal Sheathing Line Argon Arc Welding, Molding and Corrugating – LINT TOP

    To meet the needs of economic development, the power supply system is developing towards higher and higher voltage levels. In the power supply system, ultra-high-voltage power cables play a role in power transmission. These types of cables generally require a metal sheath structure to meet the performance requirements of the cable itself and the requirements of the environment. At present, metal sheath of ultra-high voltage power cables is generally protected by inert gas (helium or argon), a...