Individual Drive Motor Type Of rod Break Down M/C

Individual Drive Motor Type Of rod Break Down M/C

Product Detail

Product Tags

Non-slip drawing machine (single or double wire) features

 

Enhance production ability

The rapid dies change system need not change all the dies in working but final one, because of using individual motor drive technology.

Machine faults of electrical & mechanical can be shown on monitor for more easier maintenance and reducing downtime.

Programmable logic controller (PLC) electrical systems.

Flexible adjustment of the elongation ratio of wire dies for production.

High quality surface of the wire, because the design of capstan and the center line has inclination angle.

Cost saving

Saving electrical energy 20%, due to slightly slip-rate design.

To power off unneeded motor, saving energy up to 20%.

To slightly slip rate design. Reducing drawing dies, capstans, and drawing lubricant oil consumption.

Structural Design

Tandem cabinet combined mechanism, each wire capstan driven by independent servo motor.

Due to the fully-immersed drawing basin, take good wire cooling effect.

Slightly-slip rate design, deceasing the abrasion of capstan also reducing the sliding & friction to the wire.

Precision helically gears for extremely smooth operation and homogeneous load transmission.

Low noise operation, lower than 85db. No need enclosures.

Easy maintenance to the slip ring and carbon brushes.

Can join with variable subsequence equipment.

Machine type

LT-5M

LT-7M

LT-9M

LT-11M

LT-13M

Material

copper wire

copper wire

copper wire

AL/AL alloy

copper wire

AL/AL alloy

copper wire

AL/AL alloy

Drawing dies NO./Max

5

7

9

11

13

Drawing line speed

400 MPM/Max

1200 MPM/Max

1200 MPM/Max

1500 MPM/Max

1500 MPM/Max

No. Of wires

1

1

2

1

2

1

2

1

2

Wire inlet dia.

Φ12.5mm copper wire

Φ8.0mm copper wire

Φ8.0mm copper wire

Φ9.5mm AL/Al alloy

Φ8.0mm copper wire

Φ9.5mm AL/Al alloy

Φ8.0mm copper wire

Φ9.5mm AL/Al alloy

Wire finished

3.6-6.0mm/Max copper wire

3.0-2.6mm/Max copper wire

3.6-2.2mm/Max copper wire

4.7-2.6mm/Max Al/Alloy

3.6-1.6mm/Max copper wire

4.7-1.8mm/Max Al/Alloy

3.6-1.2mm/Max copper wire

4.7-1.5mm/Max Al/Alloy

Type of machine

Capstans are arranged in horizontal

Control system

By PLC control

Drive technology

Each capstan has drive by individual drive motor.

Wire elongation per draft (%)

Variable

Variable

Variable

Variable

Variable

The rapid dies change system

The rapid dies change system need not change all the dies in working but final one, that save a lot of time.

 

Related Products


open
statement
WhatsApp Online Chat !