laser diameter measuring gauge

Using a complete scientific top quality management program, great high-quality and fantastic religion, we win great track record and occupied this area for laser diameter measuring gauge, cable heating cycle test system , Aluminium Rod Breakdown Machine , cable braider machine , You should send us your specifications and requirements, or feel totally free to speak to us with any questions or inquiries that you may have. We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of laser diameter measuring gauge, We only supply quality items and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom merchandise etc that can according to customer's requirement.


  • Laser Diameter Gauge

    Laser Diameter Gauge

    1. Introduction The equipment is usually used to measure the diameter of the production line online, there are two types: Single-axis and double-axis. It can be equipped with remote feedback system and the feedback signal is sent to the host to control the stable operation of the whole production line. 2. Technical Parameters Model Effective Measuring Range (mm) Measuring Accuracy Structure LT-25 0.2-20 0.002±0.02%D Single-axis LT-60 0.4-45 0.003±0.02%D Single-ax...
  • Factory Free sample Sf6 Standard Capacitor -
 HV Shielded Test Room – LINT TOP

    Factory Free sample Sf6 Standard Capacitor - HV Shielded Test Room – LINT TOP

    1. Introduction The HV partial discharge hall is mainly used for power transformer, HV inductor, arrester, HV switch, HV XLPE cable and so on, the shielded room is used for avoiding electromagnetic interference which can affect partial discharge test. 2. Technical Parameters Rated Voltage (kV) ±100-2000 (and above) Exterior Dimension (m) 60*40*30(L*W*H)(bigger size is available) Grounding Resistor Requirement<1.0Ω Insulating Resistance ≤10KΩ(measured after completin...
  • OEM Manufacturer Shielding Room -
 Power Cable Test Termination – LINT TOP

    OEM Manufacturer Shielding Room - Power Cable Test Termination – LINT TOP

    1. Introduction For power cable PD test, AC test, impulse test, tan delta test, etc. 2. Technical Parameters There are two types: 1. Oil test terminal (for XLPE cables under 35KV). 2. Deionized water terminal (for XLPE cables under 66KV-500KV). The water terminal consists of epoxy resin out and inter tube. The water at HV side cycles in the inner tube around the cable and back to outer tube. The terminal is fixed on movable base by bearing and hydraulic unit, and can rise to 45° for test. Cal...
  • OEM/ODM Factory Cable Testing Machine -
 HV Shielded Test Room – LINT TOP

    OEM/ODM Factory Cable Testing Machine - HV Shielded Test Room – LINT TOP

    1. Introduction The HV partial discharge hall is mainly used for power transformer, HV inductor, arrester, HV switch, HV XLPE cable and so on, the shielded room is used for avoiding electromagnetic interference which can affect partial discharge test. 2. Technical Parameters Rated Voltage (kV) ±100-2000 (and above) Exterior Dimension (m) 60*40*30(L*W*H)(bigger size is available) Grounding Resistor Requirement<1.0Ω Insulating Resistance ≤10KΩ(measured after completin...
  • Hot New Products High Voltage Cable Testing Equipment -
 Cable Heating Cycle Test System – LINT TOP

    Hot New Products High Voltage Cable Testing Equipment - Cable Heating Cycle Test System – LINT TOP

    1. Introduction The heavy current is used for testing power transformer, high voltage mutual inductor, arrester, high voltage XLPE cable and so on. It adopts heavy current load test to test sample with heavy current for judging the quality so that users can improve products quality. 2. Environment 1. Maximum altitude: 1500m 2. Temperature range: -5-+35℃ 3. Relative humidity(non-condensing): ≤90% 4. Temperature range of electronic component: 10-+40℃ 5. Relative humidity of electronic component...
  • Reasonable price Hv Laboratory Machine -
 AC Resonance PD Free Test System – LINT TOP

    Reasonable price Hv Laboratory Machine - AC Resonance PD Free Test System – LINT TOP

    Compared with overhead lines, cable lines have the advantages of concealed laying, less climate interference, less maintenance, and less impact on the city’s city appearance, and their application in urban power grids is becoming more and more common. Among them, cross-linked polyethylene (XLPE) power cables have become mainstream cables because of their good electrical mechanical performance, large transmission capacity, and flexible construction and installation. Long-distance high-vo...
  • Fast delivery Wire Insulation Spark Tester -
 Horizontal Tensile Testing Machine – LINT TOP

    Fast delivery Wire Insulation Spark Tester - Horizontal Tensile Testing Machine – LINT TOP

    1. Introduction Horizontal tensile testing machine is designed specifically for tensile testing of overhead conductors, these test frames use a horizontal test opening to accommodate long specimens and high elongation demands. 2. Features 1. Large effective bed clearance enables testing of a wide range of specimens, full length specimens; sling construction; high capacity specimens. 2. An adjustable carriage is provided supported on free moving rollers for easy placement of the carriage appro...
  • 2019 High quality Power Frequency Ac Spark Tester -
 SF6 Standard Capacitor – LINT TOP

    2019 High quality Power Frequency Ac Spark Tester - SF6 Standard Capacitor – LINT TOP

    1. Introduction The standard capacitor is widely used in the high voltage test. It can be connected with tan delta bridge to measure the dielectric loss of test object. For example, during dielectric loss test, it is used as standard, and compare the capacitance and tgδ value with measuring capacitor, cable, bushing, insulator, transformer winding and insulation materials. 2. Features 1. Rated voltage: 10-400kV 2. Rated capacitance: 50, 100pf 3. Frequency: 50Hz 4. Precision: ≤±0.5% 5.Drift of...
  • Free sample for Cable Test Termination System -
 Power Frequency AC Spark Tester – LINT TOP

    Free sample for Cable Test Termination System - Power Frequency AC Spark Tester – LINT TOP

    1. Introduction Power frequency AC spark tester is a dedicated test device for detecting wire and cable insulation faults. Integrated with the technology of solid-state AC voltage regulation and single-chip microprocessor control, the machine has a stable voltage output (not affected by the change of the power supply voltage), high fault detection sensitivity, versatility, user-friendly, safe and reliable, new structure and beautiful appearance. 2. Technical Parameters Model LT-15A LT...
  • OEM Supply Hv Shielded Test Room -
 AC Resonance PD Free Test System – LINT TOP

    OEM Supply Hv Shielded Test Room - AC Resonance PD Free Test System – LINT TOP

    Compared with overhead lines, cable lines have the advantages of concealed laying, less climate interference, less maintenance, and less impact on the city’s city appearance, and their application in urban power grids is becoming more and more common. Among them, cross-linked polyethylene (XLPE) power cables have become mainstream cables because of their good electrical mechanical performance, large transmission capacity, and flexible construction and installation. Long-distance high-vo...
  • Fast delivery Wire Insulation Spark Tester -
 Horizontal Tensile Testing Machine – LINT TOP

    Fast delivery Wire Insulation Spark Tester - Horizontal Tensile Testing Machine – LINT TOP

    1. Introduction Horizontal tensile testing machine is designed specifically for tensile testing of overhead conductors, these test frames use a horizontal test opening to accommodate long specimens and high elongation demands. 2. Features 1. Large effective bed clearance enables testing of a wide range of specimens, full length specimens; sling construction; high capacity specimens. 2. An adjustable carriage is provided supported on free moving rollers for easy placement of the carriage appro...
  • OEM Factory for Partial Discharge Shielding Room -
 Power Frequency AC Spark Tester – LINT TOP

    OEM Factory for Partial Discharge Shielding Room - Power Frequency AC Spark Tester – LINT TOP

    1. Introduction Power frequency AC spark tester is a dedicated test device for detecting wire and cable insulation faults. Integrated with the technology of solid-state AC voltage regulation and single-chip microprocessor control, the machine has a stable voltage output (not affected by the change of the power supply voltage), high fault detection sensitivity, versatility, user-friendly, safe and reliable, new structure and beautiful appearance. 2. Technical Parameters Model LT-15A LT...