Leading Manufacturer for Copper Rod Breakdown Line - Copper Horizontal Enameling Machine – LINT TOP

Leading Manufacturer for Copper Rod Breakdown Line - Copper Horizontal Enameling Machine – LINT TOP

Product Details

FAQ

Product Details

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for Wire And Cable Laser Printer, Niehoff Wire Drawing Machine, Uv Laser Machine, We sincerely welcome all guests to setup small business associations with us on the basis of mutual positive aspects. You should get in touch with us now. You'll get our professional reply within 8 hours.
Leading Manufacturer for Copper Rod Breakdown Line - Copper Horizontal Enameling Machine – LINT TOP Detail:

1. Introduction

This machine is used to produce enameling wires below 0.8mm, commonly in fan motor wires, motor wires and transformer wires. It can produce 32 wires at the same time. It is even suitable for new factories and new operators for its simple operation.

2. Features

1. With special design, our oven takes full advantage of heat discharged. So our oven almost doesn’t consume the electricity.
2. PLC control for the 4 main control point of the oven to ensure the stability and not be affected by wire break.
3. Exhausted air is fully burned and clean to the air. So no energy loss from exhausting.
4. The structure and material using make sure burning fully under 700℃ for a long time.

3. Technical Parameters

Model

LT-1T/2800-24/10-S

LT-2T/3000-28/8-S

LT-4T/4000-32/8-S

LT-5T/4800-18/10-D(LD2)

LT-6T/5200-18/10-D(LD2)

Wire Range(mm)

Φ0.04-0.07

Φ0.06-0.10

Φ0.10-0.30

Φ0.25-0.55

Φ0.40-0.80

DV Value

24PU

22/PU

25/PE

25/PE

25/PE

No. of Lines

24

28

32/28/24

20

18

Max. Passes(Dual Coating)

10

8

8

9

10

Wire Pitch(mm)

5

5

6.5

7

8

Pay-off Spool Size

Φ200-Φ250

Φ200-Φ300

Φ300-Φ400

Φ400-Φ630

Φ400-Φ630

Applicator Method

Felt/Dies

Felt

Felt/Dies

Felt/Dies

Felt/Dies

Take-up Spool Size

PT2-PT4

PT2-PT10

PT4-PT25

D(PT10-PT45)/LD2(PT25-PT270)

D(PT10-PT45)/LD2(PT25-PT270)

Ann. Oven Length(mm)

3000

3500

6000

9000

9000

Max. Temp of Annealer()

450

450

500

500

550

Baking Oven Length(mm)

2800

3000

4000

4800

5200

Catalyst

Ceramic

Ceramic

Ceramic

Ceramic

Ceramic

Install Power(Kw)

110

115

125

145

155

Energy  Consumption(KwH/24Hrs)

600-650

650-700

300-400

350-450

450-550

Out-put(Kgs/24Hrs)

290(Φ0.05mm)

540(Φ0.08mm)

1600(Φ0.20mm)

2000(Φ0.40mm)

2370(Φ0.60mm)

Operating Voltage

380V-50Hz

380V-50Hz

380V-50Hz

380V-50Hz

380V-50Hz

Consumption/kg

2.06KwH/Kg

0.88KwH/Kg

0.25KwH/Kg

0.22KwH/Kg

0.222KwH/Kg

Environment Data VOC(mg/m³)

≤20

≤20

≤20

≤20

≤20


Product detail pictures:


Related Product Guide:

Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Leading Manufacturer for Copper Rod Breakdown Line - Copper Horizontal Enameling Machine – LINT TOP , The product will supply to all over the world, such as: Cyprus, Lithuania, kazakhstan, During in 11 years, We have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !

FAQ

Q: Can I visit your factory?

A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.

Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.

-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.

Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.

Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.

Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.

Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.

Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.

Send your message to us:

Write your message here and send it to us