Manufactur standard Building Wire Jacketing Extrusion Line - Vertical Enameling Machine – LINT TOP

Manufactur standard Building Wire Jacketing Extrusion Line - Vertical Enameling Machine – LINT TOP

Product Details

FAQ

Product Details

We support our prospective buyers with ideal top quality merchandise and superior level provider. Becoming the specialist manufacturer in this sector, we have now attained abundant practical expertise in producing and managing for Continuous Cast Copper Wire, Copper Wire Granulator For Sale, Wire Braider, We are sincerely looking forward to cooperate with customers all over the world. We believe we can satisfy you. We also warmly welcome customers to visit our company and purchase our products.
Manufactur standard Building Wire Jacketing Extrusion Line - Vertical Enameling Machine – LINT TOP Detail:

1. Introduction

This machine is used to produce wires larger than 0.8 mm in diameter. This machine adopts the latest R & D of “energy saving and environmental protection” type oven. The energy consumption is less than 200kwh/t.

2. Features

1. High Efficiency: PLC automatic control
2. Environmental protection: PLC auto exhaust value
3. Environment Data: VOC≤20mg/m³

3. Technical Parameters

Model

LT-8000V-1/19*-6

LT-8000V-1/14*2-8

LT-8000V-1/8*2-9

Wire Range (mm)

Cu: Φ0.80-1.50

 Al: Φ0.80-1.80

Cu: Φ1.20-2.50

 Al: Φ1.20-2.80

Cu: Φ0.80-1.30

Al: Φ0.80-3.5

DV Value

25

25

25

Total DV

950

700

400

Lines

38

28

16

Inline Drawing

/

/

/

Capstan

2

2/4

2/4

Install Power (Kw)

295

295

295

Out Put (Kgs/24Hrs)

3300(Cu: Φ1.20mm)

4240(Cu:Φ2.0mm)

2420(Cu: Φ2.0mm)

Power Consumption (KwH/24Hrs)

1800-2000

2000-2200

2000-2200

Consumption/kg

0.52KwH/Kg(Cu)

0.42KwH/Kg(Cu)

0.72KwH/Kg(Cu)

Environment Data VOC (mg/m³)

≤20

≤20

≤20


Product detail pictures:


Related Product Guide:

Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for Manufactur standard Building Wire Jacketing Extrusion Line - Vertical Enameling Machine – LINT TOP , The product will supply to all over the world, such as: Singapore, Greenland, Gambia, We've more than 10 years exported experience and our products and solutions have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!

FAQ

Q: Can I visit your factory?

A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.

Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.

-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.

Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.

Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.

Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.

Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.

Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.

Send your message to us:

Write your message here and send it to us