optic cable extrusion line

With our excellent administration, strong technical capability and strict excellent control method, we carry on to offer our clients with responsible good quality, reasonable costs and great companies. We intention at becoming considered one of your most responsible partners and earning your pleasure for optic cable extrusion line, Galvanized Steel Tape for Armoring , shielding room , copper rod breakdown line , Always for the majority of business users and traders to provide best quality products and excellent service. Warmly welcome to join us, let's innovation together, to flying dream. No matter new customer or old customer, We believe in long term and trusted relationship for optic cable extrusion line, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.


  • Optical Fiber Sheathing Line

    Optical Fiber Sheathing Line

    1. Introduction The line is used to extrude inner sheath and outer sheath of optical cable, the extruding materials: LDPE, MDPE, HDPE and so on. 2. Technical Parameters Extruding Outer Dia. (mm) Φ7-Φ40 Structure Speed (m/min) 100 Production Speed (m/min) 10-80 Line Length (m) About 60 Extruder Φ65, Φ90, Φ120
  • Top Quality Wire Take Up Machine -
 Optical Fiber Coloring and Rewinding Line – LINT TOP

    Top Quality Wire Take Up Machine - Optical Fiber Coloring and Rewinding Line – LINT TOP

    1. Introduction With the rapid development of optical communication technology, the amount of fiber optic cables used in optical communication systems has also increased rapidly. After drawing the optical fiber, in order to facilitate the identification of multiple optical fibers in the beam tube during subsequent processing and use, the method of coloring on the surface of the optical fiber is generally used. The fiber coloring and rewinding line is a production device that colors the surfac...
  • Factory Cheap Wire Drawing Process -
 Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    Factory Cheap Wire Drawing Process - Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    1. Introduction Simplex and duplex indoor optical cables are suitable for the interconnection between instruments and communication equipment. It uses tight sleeve optical fiber, high-strength aramid reinforcement, with flame-retardant outer sheath structure. The structure of the optical cable is simple, with a small outer diameter and light weight; the all-dielectric structure is free from electromagnetic interference. It is easy to strip and use, so it has a very wide range of applications ...
  • China wholesale Copper Drawing Machine -
 Automatic Coiling / Binding / Shrinking Machine – LINT TOP

    China wholesale Copper Drawing Machine - Automatic Coiling / Binding / Shrinking Machine – LINT TOP

    During the production of wires and cables, the packaging method in the later stage generally using a coiling, binding and film packaging. In the past, it was mainly used by a simple rewinding machine, and then wrapped films by manual. But this packaging method is mainly manual, not only has low production efficiency, high labor cost, but also it has unstable quality. The automatic coiling with binding and thermal shrinking machine provided by our company can automatically complete fully-autom...
  • Factory Outlets Planetary Cage Strander -
 Copper Rod Continuous Casting and Rolling Line – LINT TOP

    Factory Outlets Planetary Cage Strander - Copper Rod Continuous Casting and Rolling Line – LINT TOP

    1. Prospect Under the situation of scarce copper resources and increasing stringent environmental protection requirements, most countries recycle and reuse scrap copper to save copper resources and protect the global environment. Most countries in the world are no longer adopt traditional boat-shaped copper ingots, but instead adopt continuous casting and rolling (CCR) production processes. Scrap copper is melted into recycled copper ingots through slag removal and crushing. Copper ingots are...
  • OEM/ODM Supplier Pelletizing Line -
 Skip Type Strander / Bow Twister – LINT TOP

    OEM/ODM Supplier Pelletizing Line - Skip Type Strander / Bow Twister – LINT TOP

    Bow twister is the important equipment for wire and cable cabling, it is mainly used for control cables, low voltage cables, rubber sheathed cables, mining cables, overhead insulated cables and other products. With the continuous decrease of wire and cable products’ profit, it is imperative to reduce the production cost for the manufacturers. And improving production efficiency is one of the effective ways to reduce production cost. With the unique structure, the production efficiency of bow ...
  • Excellent quality High Speed Braiding Machine -
 FTTH Drop Cable Extrusion Line – LINT TOP

    Excellent quality High Speed Braiding Machine - FTTH Drop Cable Extrusion Line – LINT TOP

    1. Introduction Butterfly-type drop optical cable is a new type of indoor fiber optic cable. It is suitable for indoor and terminal installation places that are often need to be bent. It can be cut according to the distance of the site when wiring, and it can be installed with quick connection connectors and optical fiber cold connectors. There is no need to melt fiber during site construction, which greatly improves engineering construction efficiency. The structure of the butterfly-type dro...
  • Factory Cheap Wire Drawing Process -
 Copper Rod Continuous Casting and Rolling Line – LINT TOP

    Factory Cheap Wire Drawing Process - Copper Rod Continuous Casting and Rolling Line – LINT TOP

    1. Prospect Under the situation of scarce copper resources and increasing stringent environmental protection requirements, most countries recycle and reuse scrap copper to save copper resources and protect the global environment. Most countries in the world are no longer adopt traditional boat-shaped copper ingots, but instead adopt continuous casting and rolling (CCR) production processes. Scrap copper is melted into recycled copper ingots through slag removal and crushing. Copper ingots are...
  • High reputation Enameling Machine -
 Aluminum / Aluminum Alloy Rod CCR Line – LINT TOP

    High reputation Enameling Machine - Aluminum / Aluminum Alloy Rod CCR Line – LINT TOP

    1. Introduction This production line produces round aluminum rod and aluminum alloy rod for electricians by adopting the technology of continuous casting and rolling. The diameter of finished aluminum rod is Φ9.5mm, Φ12.5mm, Φ15mm. This line has the advantages of high efficiency, low energy consumption, excellent quality of aluminum/aluminum alloy rod and so on. 2. Technical Parameters Description Aluminum Rod CCR Line Aluminum Alloy Rod CCR Line  Rolling type Three-roll Y-type ...
  • Low price for Cable Extrusion Machine -
 Automatic Coiling and Binding Machine – LINT TOP

    Low price for Cable Extrusion Machine - Automatic Coiling and Binding Machine – LINT TOP

    During the production of wires and cables, the packaging method in the later stage generally using a coiling and binding type. In the past, it was mainly run by a simple rewinding machine, and then wrapped by manual. But this packaging method is mainly manual, with low production efficiency, high labor cost and unstable quality. The machine provided by our company is mainly use din the coiling and binding process of wires and cables, which ensures the cables not be loose and convenient coil l...
  • PriceList for Compounding Line -
 SZ Stranding Line – LINT TOP

    PriceList for Compounding Line - SZ Stranding Line – LINT TOP

    1. Introduction With the rapid development of optical communications, the amount of optical fiber loose tube cable for outdoor has increased rapidly. However, the capacity of the optical fiber in the loose tube is limited and it is impossible to make the loose tube large. In addition, in order to facilitate the connection identification of optical fibers and the distribution of optical nodes, the number of optical fibers in every loose tube should not be too large. For large-capacity communic...
  • 2019 wholesale price Lan Cable Drawing Line -
 Braiding Machine – LINT TOP

    2019 wholesale price Lan Cable Drawing Line - Braiding Machine – LINT TOP

    Braiding machine is a device used for the production of braiding wire and cable shield or armor. According to different product requirements, it can be used for braiding copper wire, tinned copper wire, silver plated copper wire, aluminum magnesium alloy wire, steel wire and other materials. It is suitable for the braiding of control cables, radio frequency cables, data cables, marine cables, mining cables and other products. Our company has many years of experience in the development and pro...