Skip Type Stranding Machine

Innovation, excellent and reliability are the core values of our firm. These principles today more than ever form the basis of our success as an internationally active mid-size corporation for Skip Type Stranding Machine, cable test termination system , cable Taping Machine , Ac Resonance Withstand Voltage Test System , While using the improvement of society and economy, our corporation will retain a tenet of "Focus on trust, high quality the first", moreover, we count on to make a glorious long run with each and every customer. Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, belief the very first and management the advanced" for Skip Type Stranding Machine, We critically promise that we deliver all the customers with the best quality solutions, the most competitive prices and the most prompt delivery. We hope to win a resplendent future for customers and ourselves.


  • Top Suppliers Building Wires Insulation Extruder Line -
 Planetary Strander – LINT TOP

    Top Suppliers Building Wires Insulation Extruder Line - Planetary Strander – LINT TOP

    Planetary strander is an important equipment for wire and cable stranding. It is mainly used for copper stranded wire, aluminum stranded wire, steel stranded wire, steel core aluminum stranded wire, and cabling of insulated wire core and OPGW stranding, etc. Generally, the traditional planetary strander adopts the ground shaft transmission type, and the transmission of capstan and the stranding cage are usually driven by the same motor through the reduction box, gearbox, ground shaft, angle b...
  • Factory supplied Planetary Cage-Type Twisting Machine -
 Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    Factory supplied Planetary Cage-Type Twisting Machine - Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    1. Introduction Simplex and duplex indoor optical cables are suitable for the interconnection between instruments and communication equipment. It uses tight sleeve optical fiber, high-strength aramid reinforcement, with flame-retardant outer sheath structure. The structure of the optical cable is simple, with a small outer diameter and light weight; the all-dielectric structure is free from electromagnetic interference. It is easy to strip and use, so it has a very wide range of applications ...
  • Cheapest Price Cable Stranding Line -
 Continuous Extrusion Production Lines for Copper Flat Wires – LINT TOP

    Cheapest Price Cable Stranding Line - Continuous Extrusion Production Lines for Copper Flat Wires – LINT TOP

    1. Introduction For the production of copper flat wire, round wire, commutator segment and other solid copper conductor. 2. Features 1. Much low loss of raw material, which makes high utilization materials. 2. With specially designed extrusion wheel, chamber and dies, our extrusion lines have longer service life and higher output compared with others’ same mode machine, which also brings a lower power consumption and lower production cost. 3. Adopting position sensor in the swing dancer, whic...
  • China wholesale Copper Drawing Machine -
 Triple-layer Co-extrusion Dry-cure CCV Line – LINT TOP

    China wholesale Copper Drawing Machine - Triple-layer Co-extrusion Dry-cure CCV Line – LINT TOP

    1. Introduction This Continuous Catenary Vulcanization (CCV) Line is designed for continuous producing 6-35KV, 35-132KV XLPE insulated power cable with 3-layer co-extrusion. 2. Features 1. Controlled by computer and operated by touch screen, communicates with profibus. 2. Adopting 65 conductor shield, 150 insulation, 90 insulation shield, triple-layer co-extrusion. 3. Controlled by field density, shifting phase trigger function of tubes. 4. The specially designed triple-layer co-extrusion cro...
  • Factory Cheap Hot Wire Manufacturing Machine -
 Trolley Type Heat and Aging Furnace / Aluminum Alloy Wires Annealing Furnace – LINT TOP

    Factory Cheap Hot Wire Manufacturing Machine - Trolley Type Heat and Aging Furnace / Aluminum Alloy Wires Annealing Furnace – LINT TOP

    In order to improve the mechanical properties of aluminum alloy wires after drawing, quenching heat treatment is generally required. But the strength and hardness of aluminum alloy wires do not immediately increase after quenching, in order to improve the strength and hardness of aluminum alloy wire, aging treatment after quenching is required. The aging of aluminum alloy wire can occur at normal temperature, which is called “natural aging”. However, due to the low temperature, the natural ag...
  • Chinese wholesale Rod Breakdown Machine -
 Sheathing Extrusion Line – LINT TOP

    Chinese wholesale Rod Breakdown Machine - Sheathing Extrusion Line – LINT TOP

    1. Introduction It is used for outer sheath extrusion of insulated core or stranded core. Various imported screw cylinder and barrel with high extrusion output to be selected for extrusion such as PVC, PE, LSZH, Teflon, Nylon and other materials. 2. Technical Parameters Model LT-90 LT-120 LT-150 LT-200 Outer Dia. (mm) Φ8-40 Φ30-80 Φ35-140 Φ70-180 The Screw Dia. (mm) Φ90 Φ120 Φ150 Φ200 Length to Diameter Ratio of Screw 25:1 Max. Extrusion (Phi 200)...
  • Low MOQ for Copper Multiwire Drawing Machine -
 Copper Horizontal Enameling Machine – LINT TOP

    Low MOQ for Copper Multiwire Drawing Machine - Copper Horizontal Enameling Machine – LINT TOP

    1. Introduction This machine is used to produce enameling wires below 0.8mm, commonly in fan motor wires, motor wires and transformer wires. It can produce 32 wires at the same time. It is even suitable for new factories and new operators for its simple operation. 2. Features 1. With special design, our oven takes full advantage of heat discharged. So our oven almost doesn’t consume the electricity. 2. PLC control for the 4 main control point of the oven to ensure the stability and not be aff...
  • 100% Original Wire Extrusion Machine -
 RBD Machine with Individual Drivers – LINT TOP

    100% Original Wire Extrusion Machine - RBD Machine with Individual Drivers – LINT TOP

    1. Introduction In wire and cable products, traditional conductors are mainly copper and aluminum wires, but aluminum alloy cables have gradually gained widespread application in recent years. As the first process in the manufacture of cable products, the drawing of the conductor plays a vital role and is closely related to the quality of the product. Due to its large hardness, the use of traditional sliding gear-driven wire drawing machines can easily cause wire surface damage and drawing dr...
  • China wholesale Copper Drawing Machine -
 Copper / Aluminum RBD Machine  – LINT TOP

    China wholesale Copper Drawing Machine - Copper / Aluminum RBD Machine – LINT TOP

    We have many years’ experience in researching and developing copper / aluminum RBD machine. In order to meet market needs, we can provide a variety of different copper / aluminum RBD machines. The copper and aluminum RBD machines provided by our company can use 8.0mm copper rod and 9.5mm aluminum rod as the diameter of the wire. After drawing through the wire drawing wheels, the copper wire or aluminum wire with different outlet ranges can be obtained. At the same time, the oxide film on the ...
  • Renewable Design for Laser Engraving Machine -
 Cradle Type Cabling Machine/ Laying Up Machine – LINT TOP

    Renewable Design for Laser Engraving Machine - Cradle Type Cabling Machine/ Laying Up Machine – LINT TOP

    Cradle type cabling machine is an important equipment for wire and cable cable forming. It is mainly used for cabling 3 to 6-core insulated wires, which can be used in round cables with back-twisting, and stranding fan-shaped cables without back-twisting. It is also can be used for cabling LV&MV power cables, control cables, mining cables, and other large-section cables. It is can be used for non-metal and metal tape wrapping, steel tape armoring and filling with this machine. Our company...
  • OEM/ODM China Stranding Machine -
 Optical Fiber Coloring and Rewinding Line – LINT TOP

    OEM/ODM China Stranding Machine - Optical Fiber Coloring and Rewinding Line – LINT TOP

    1. Introduction With the rapid development of optical communication technology, the amount of fiber optic cables used in optical communication systems has also increased rapidly. After drawing the optical fiber, in order to facilitate the identification of multiple optical fibers in the beam tube during subsequent processing and use, the method of coloring on the surface of the optical fiber is generally used. The fiber coloring and rewinding line is a production device that colors the surfac...
  • New Arrival China Bunching Machine -
 Optical Cable Secondary Coating Line – LINT TOP

    New Arrival China Bunching Machine - Optical Cable Secondary Coating Line – LINT TOP

    1. Introduction The secondary coating of optical fiber is to coat the outer surface of the optical fiber once, and then squeeze the loose tube with a certain diameter and a certain thickness. The primary coated fiber can move freely in the loose tube, and the loose tube is filled with water blocking ointment. The secondary coating of the optical fiber is the second layer of protection for the optical fiber after the primary coating and coloring. The optical strength of the optical fiber after...