wire rotating line

We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for wire rotating line, Electric Wire Recycling Machine , Bow Type Laying Up Machine , insulation PVC cable production line , should you have any query or wish to place an initial order please do not hesitate to contact us. Our business sticks for the basic principle of "Quality could be the life with the firm, and track record will be the soul of it" for wire rotating line, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.


  • High Speed Double Twist Buncher

    High Speed Double Twist Buncher

    During the production of wires and cables, multi-strand conductors need to be twisted before the insulation extrusion.The stranding of multi-strand conductors can be carried out by stranding machine or bunching machine. When the diameter of single wire is very small and the stranding finished wires with extra-soft performance, then you can only use the twisting machine instead of traditional stranding equipment. Wires from a number of single-wire pay-off bobbins which are layered and arranged...
  • China New Product Copper Wire Drawing Machine -
 Continuous Extrusion Production Lines for Copper Flat Wires – LINT TOP

    China New Product Copper Wire Drawing Machine - Continuous Extrusion Production Lines for Copper Flat Wires – LINT TOP

    1. Introduction For the production of copper flat wire, round wire, commutator segment and other solid copper conductor. 2. Features 1. Much low loss of raw material, which makes high utilization materials. 2. With specially designed extrusion wheel, chamber and dies, our extrusion lines have longer service life and higher output compared with others’ same mode machine, which also brings a lower power consumption and lower production cost. 3. Adopting position sensor in the swing dancer, whic...
  • China wholesale Copper Drawing Machine -
 Optical Fiber Sheathing Line – LINT TOP

    China wholesale Copper Drawing Machine - Optical Fiber Sheathing Line – LINT TOP

    1. Introduction The line is used to extrude inner sheath and outer sheath of optical cable, the extruding materials: LDPE, MDPE, HDPE and so on. 2. Technical Parameters Extruding Outer Dia. (mm) Φ7-Φ40 Structure Speed (m/min) 100 Production Speed (m/min) 10-80 Line Length (m) About 60 Extruder Φ65, Φ90, Φ120
  • Lowest Price for Metal Sheathing Line -
 Aluminum / Aluminum Alloy Rod CCR Line – LINT TOP

    Lowest Price for Metal Sheathing Line - Aluminum / Aluminum Alloy Rod CCR Line – LINT TOP

    1. Introduction This production line produces round aluminum rod and aluminum alloy rod for electricians by adopting the technology of continuous casting and rolling. The diameter of finished aluminum rod is Φ9.5mm, Φ12.5mm, Φ15mm. This line has the advantages of high efficiency, low energy consumption, excellent quality of aluminum/aluminum alloy rod and so on. 2. Technical Parameters Description Aluminum Rod CCR Line Aluminum Alloy Rod CCR Line  Rolling type Three-roll Y-type ...
  • Popular Design for Intermediate Wire Drawing Machine -
 Upward Continuous Casting System for Oxygen-free Copper Rod – LINT TOP

    Popular Design for Intermediate Wire Drawing Machine - Upward Continuous Casting System for Oxygen-free Copper Rod – LINT TOP

    1. Introduction Upward continuous casting machine is a new technology to produce oxygen free copper rod, tube, and flat billet at a great length. Its production of oxygen free copper rod and profiles are featured with high conductivity and low oxygen content. Compare with some traditional technology, this new method is lower in capital investment, easy to operate, economic in producing consuming, high quality in production, and flexible in changing production size but no pollution to environm...
  • Factory making Bow Twisting Machine -
 Vertical Enameling Machine – LINT TOP

    Factory making Bow Twisting Machine - Vertical Enameling Machine – LINT TOP

    1. Introduction This machine is used to produce wires larger than 0.8 mm in diameter. This machine adopts the latest R & D of “energy saving and environmental protection” type oven. The energy consumption is less than 200kwh/t. 2. Features 1. High Efficiency: PLC automatic control 2. Environmental protection: PLC auto exhaust value 3. Environment Data: VOC≤20mg/m³ 3. Technical Parameters Model LT-8000V-1/19*-6 LT-8000V-1/14*2-8 LT-8000V-1/8*2-9 Wire Range (mm) Cu: Φ0.80-1....
  • High Quality for Copper Horizontal Enameling Machine -
 Planetary Strander – LINT TOP

    High Quality for Copper Horizontal Enameling Machine - Planetary Strander – LINT TOP

    Planetary strander is an important equipment for wire and cable stranding. It is mainly used for copper stranded wire, aluminum stranded wire, steel stranded wire, steel core aluminum stranded wire, and cabling of insulated wire core and OPGW stranding, etc. Generally, the traditional planetary strander adopts the ground shaft transmission type, and the transmission of capstan and the stranding cage are usually driven by the same motor through the reduction box, gearbox, ground shaft, angle b...
  • Special Price for Planetary Stranding Machine -
 Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    Special Price for Planetary Stranding Machine - Simplex & Duplex Indoor Optical Fiber Cable Production Line – LINT TOP

    1. Introduction Simplex and duplex indoor optical cables are suitable for the interconnection between instruments and communication equipment. It uses tight sleeve optical fiber, high-strength aramid reinforcement, with flame-retardant outer sheath structure. The structure of the optical cable is simple, with a small outer diameter and light weight; the all-dielectric structure is free from electromagnetic interference. It is easy to strip and use, so it has a very wide range of applications ...
  • OEM/ODM China Loose Tube Production Line -
 Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    OEM/ODM China Loose Tube Production Line - Drawing, Annealer, Pre-heating Insulation Tandem Extrusion Production Line – LINT TOP

    Nowadays, the world has already entered the information society. LAN, the basic unit of high-speed information network, its transmission rate is getting faster with the development of society. The data cable is one of the most important transmission media of the LAN, and the development of the LAN is also driving the rapid growth of the data cable. In the future for a long time, data cables will be used widely . In order to meet the high-speed information transmission requirements of today...
  • Manufacturer of Sulation Extrusion Line -
 Automatic Coiling / Binding / Shrinking Machine – LINT TOP

    Manufacturer of Sulation Extrusion Line - Automatic Coiling / Binding / Shrinking Machine – LINT TOP

    During the production of wires and cables, the packaging method in the later stage generally using a coiling, binding and film packaging. In the past, it was mainly used by a simple rewinding machine, and then wrapped films by manual. But this packaging method is mainly manual, not only has low production efficiency, high labor cost, but also it has unstable quality. The automatic coiling with binding and thermal shrinking machine provided by our company can automatically complete fully-autom...
  • Chinese Professional Optic Cable Extrusion Line -
 Braiding Machine – LINT TOP

    Chinese Professional Optic Cable Extrusion Line - Braiding Machine – LINT TOP

    Braiding machine is a device used for the production of braiding wire and cable shield or armor. According to different product requirements, it can be used for braiding copper wire, tinned copper wire, silver plated copper wire, aluminum magnesium alloy wire, steel wire and other materials. It is suitable for the braiding of control cables, radio frequency cables, data cables, marine cables, mining cables and other products. Our company has many years of experience in the development and pro...
  • Big Discount Rod Ccr Lineal -
 Copper / Aluminum RBD Machine  – LINT TOP

    Big Discount Rod Ccr Lineal - Copper / Aluminum RBD Machine – LINT TOP

    We have many years’ experience in researching and developing copper / aluminum RBD machine. In order to meet market needs, we can provide a variety of different copper / aluminum RBD machines. The copper and aluminum RBD machines provided by our company can use 8.0mm copper rod and 9.5mm aluminum rod as the diameter of the wire. After drawing through the wire drawing wheels, the copper wire or aluminum wire with different outlet ranges can be obtained. At the same time, the oxide film on the ...