China Buy Wire Reel Machine Factories - Tubular Stranding Machine – LINT TOP

Product Details

FAQ

Product Details

We have our own sales team, design team, technical team, QC team and package team. We have strict quality control procedures for each process. Also, all of our workers are experienced in printing field for Braided Wire, Double Twist Bunching Machine, Automatic Cable Winding And Shrinking Machine, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

China Buy Wire Reel Machine Factories - Tubular Stranding Machine – LINT TOP Detail:

1.Product information

Tubular stranding machine is an important equipment for wire and cable stranding. It is mainly used for stranding with back-twist of copper, aluminum, aluminum alloy stranded wires and steel-cored aluminum stranded wires, and can also be used for cabling of insulated wires.
The traditional tubular stranding machine generally adopts the ground shaft transmission. The transmission of the traction device and the cage is usually driven by the same motor through the reduction box, gearbox, ground shaft, angle box, etc. The take-up and traverser are individually or centralizedly driven and controlled by the above motors.
This structure has many disadvantages.
(1) The ground shaft transmission is an open drive, with poor lubrication conditions and easy entry of dust and other foreign objects, causing gear wear and damage, and loud production site noise.
(2) Gear shifting is adopted, and the gearbox structure is complex. The gap between the gears is large, which is prone to movement shock and damage to the ground shaft, gears, and boxes. At the same time, due to its complex mechanical structure, it is more difficult to maintain the whole machine.
(3) Due to the limitation of the ground shaft, the rotation speed of the cage is low, and the production speed is difficult to increase, which restricts the production efficiency of the production.
(4) Due to the fixed speed ratio of the gearbox, its pitch can only be changed within a limited range. It is impossible to choose the pitch required by some process designs.

The tubular stranding machine provided by LINT TOP integrates the stranding production process of the domestic first-class cable manufacturers, and at the same time absorbs the advantages of the same type of equipment abroad. It adopts the transmission method with individual motors, and each cage and capstan are driven by separate motors.

2. Features

(1) Each component is driven by a separate motor, with a simple structure and low operating noise.
(2) Integral welding of the bottom plate of the cage, and is processed by a CNC gantry boring and milling machine at one time, with high processing precision, which can ensure the high-speed operation of the equipment.
(3) The whole machine is managed by PLC and touch screen.
(4) The equipment is equipped with a variety of protections, such as fault alarm of the AC speed control device, overload protection of the take-up, air pressure under-voltage protection, automatic shutdown of the disconnection, etc., which are safe and reliable.
(5) Before the equipment leaves the factory, the high-precision dynamic balancing instrument will check the dynamic balance of the cage, so that the main engine runs at high speed and has a long service life.
Main main technical parameters below:

Model		630/1+6	630/6+1250/1
Inlet wire diameter(mm)	Cu	Φ1.8-φ4.6	Φ1.8-φ4.6
	Al/Al alloy	Φ2.0-φ5.0	Φ2.0-φ5.0
Max. rotation speed (r/min)		500	350
Stranded outer diameter (mm)		Φ15	Φ25
Traction speed (r/min)		20-154	15-115
Stranding direction		S or Z (Optional)
Noted: In addition to the models in the table, other models can also be provided, such as 400/1+6, 500/1+6, etc. If you have any needs, please contact our sales staff.

Product detail pictures:

FAQ

Q: Can I visit your factory?

A: All the customers from both home and abroad are warmly welcomed to visit our company and factory.

Q: Do you supply the installation and commissioning?
A: Yes, we do as followings:
-As soon as customer informed us the machines are put in the right place, we will send both mechanical and electrical engineer for machine start up.
-No-load testing: After machine installed completely, we make no-load testing first.
-With-load testing: Usually we will can produce 3 different wires to make load testing.

-Acceptance report: After the buyer confirms that machine can reach all specification under contract, the acceptance report will be signed for our record that machine will be in guarantee period.

Q: What information should I offer to get a detailed quotation from you?
A: For single machine: Usually we need to know inlet wire size, outlet wire size to be produced, productivity, pay off and take up size to choose the right machine.
For new cable plant or new cable production line, we need to know the datasheet of cables to be produced, the productivity, the standards to be followed, etc to design all machines needed.

Q: Can you supply the auxiliary equipment along with the machines?
A: Yes, definitely.
We has supplied heat exchanger, copper/aluminum powder filter machine, cooling tower, chiller, air compressor, drawing dies, pointing machine, cold welders, bobbins etc. with our machines.

Q: Could you do the design for the whole plant?
A: Yes, this is our advantage.
With the data sheet of cable to be produced, the standard your cables should follows, the productivity you expected. Our engineer on production technology and machinery will make design of production machines, test equipment, accessories like bobbins, dies, rewinding lines and materials needed.

Q: How can I know the status of my order?
A: We have our OA system on tracking the production.
For any of your request we can send photos and videos of your order, also we can use FACETIME to let you know the production.

Q: How do you work on the inspection before delivery?
A: We will make dynamic balance testing, levelness testing, noise testing, etc. during production.
After production finished, usually we make no-load running of each machine before delivery. Customers are welcomed to attend the inspection.

Q: What exhibitions will you attend, can we meet in the fair?
A: Dusseldorf International Wire and Cable Fair;
Wire South America Fair;
International Wire and Cable Fair in Shanghai;
International Istanbul Wire Fair, etc.
wire Southeast Asia Fair, etc.