banner
Home » Products » Auxiliary Equipment » Copper Emulsion Filter » Copper Emulsion Filter

Copper Emulsion Filter

Copper emulsion filter is designed with European technology to keep the emulsion clean by removing copper powder from emulsion. Thus the service life of the drawing capastan and dies will be longer, the breakdown rate will be reduced and the output will be increased. In addition, it can avoid cleaning the heat exchangers frequently.

Introduction

Copper powder will be generated during drawing because of the friction between copper wire and dies while the wire or cable conductor drawing process. If the copper powder isn’t cleaned on time, it will exist in wire drawing emulsion and dies pores. So it will make wire drawing emulsion deteriorate, reduce the service life of drawing dies and drawing wheels and seriously affect the quality of wire surface. So the copper emulsion filter is necessary in the drawing production line. 

The copper powder filter provided by us is produced using European technology. It uses a special water flow design to reduce the impact on the filter cloth. The electromechanical control automatically moves the cloth. The stainless steel mesh design is convenient and easy to use. It is a guarantee for the production of excellent quality copper wire. Can be used for cleaning and filtering of copper wire drawing processing lubricant. According to different types of filter cloth, the filtering accuracy can be (10-50) um. It adopts chain mesh transmission to make the filter cloth goes full-automatically, the filter cloth reeling is equipped with water level sensor and the chain gear is synchronous. It could keep the drawing emulsion clean in case of deteriorating, remove the copper powder in drawing emulsion, extend the service life of dies and wheels; reduce the broken line rate and increase the output; use gravity reflux instead of emulsion pump to save power.

Equipment Characteristics

2.1 Using stainless steel chain mesh transmission, the tension of the filter cloth is always the same, and the cloth goes smoothly without curling;

2.2 Automatic control of cloth feeding, saving filter cloth cost;

2.3 Reduce plate heat exchanger clogging and avoid frequent heat exchanger cleaning.

Main Technical Parameters


Type

LT-FT-175

LT-FT-250

LT-FT-500

LT-FT-750

LT-FT-1000

LT-FT-1500

LT-FT-2000

Flange Diameter (mm)

DN65

DN65

DN100

DN100

DN200

DN200

DN200

Width of Filter-cloth (mm)

500

710

710

1000

1000

1500

2000

Filtering Capacity (L/min)

Max.175

Max.250

Max.500

Max.750

Max.1000

Max.1500

Max.2000


SEND US A MESSAGE
LINT TOP is a young and vital team. Our principle is to work high efficiently, timely, orderly and rigorously.
Copyright © 2010 LINT TOP CABLE TECHNOLOGY CO., LTD. 

CONTACT US

    +86-15162145573
   +86-516-85715085
       +86-516-85716085
    sales@linttop.com
    ashley.yin
   +86-15162145573

PRODUCTS

GET IN TOUCH